5″ Rotary Table Tooling Plate

  • *Preferred unit of measurement for laser engraved portions
    Please note that our ball screws only come in a metric pitch

Product Description

The rotary table tooling plate is just under 5-1/2″ in diameter and comes with a pattern of 10-32 holes in the surface to facilitate mounting fixtures for machining. Four countersunk holes are provided for mounting it to the T-slots in the Sherline rotary table, and mounting screws and T-nuts are included. The 1/2″ aluminum plate is made from aircraft grade 6061 T6 aluminum and can be drilled and tapped with additional holes as needed for your special jobs.

The pre-drilled holes are not tapped all the way through. This is to protect the surface of the rotary table from hold-down screws that might be too long. If when tightening a hold-down screw you feel it begin to bind, that means the screw is too long and you need to remove it and use a screw of the appropriate length.

On the bottom of the tooling plate is a raised boss that registers in the center hole of the rotary table for alignment. Placing the T-nuts in the slots of the rotary table so they align with the table’s outer machined reference ring will put them in alignment with the mounting holes for easy attachment of the fixture to the table.

warning-symbol
The improper use of machine tools and their accessories can result in serious injury. Before using this tool, thoroughly read the instructions and make sure you understand its proper and safe use.

safety-glasses-symbol

Always wear safety glasses when operating machine tools.

Download PDF 3725 Instructions

Instructions PDF Download

5″ Rotary Table Tooling Plate
Tooling Plate Material Aluminum
Body Coating N/A
Body Dimensions 5″ Diameter
30561 (4) 10-32 T-nuts
37250 5″ Rotary Table Tooling Plate
40670 (4) 10-32 X 1/2″ SHC Screws

Click the P/N below to download a zipped version of the IGS 3D CAD file. You will need to extract the zip file before viewing the IGS file.
3725 3D IGS model
The Rotary Table Tooling Plate is shown mounted on a CNC Rotary Table for reference only (Rotary Table not included).
You need an IGS viewer to view .igs files. CLICK HERE to download a FREE IGS viewer.