Lathe Headstock Hard Stop Kit

Due to the case-hardening process, the hard stop rods may show distinct surface discoloration. This does not impact the quality of the rods and can be buffed out if desired

SKU: 40116 Category:
  • *Preferred unit of measurement for laser engraved portions
    Please note that our ball screws only come in a metric pitch

Product Description

Starting in August, 2015 every Sherline headstock now includes the holes to add an optional hard stop. The hard stop kit, P/N 40116 includes two steel rods and a knurled thumbscrew lock. The .242″ diameter steel rods are 4″ and 8″ long. A hole through the headstock base allows the hard stop rod to be set to contact the lathe table, providing a hard stop for the Z axis during turning operations.

For those who have an older Sherline lathe and want to add the hard stop, the kit includes instructions with dimensions on where your headstock case will need to be drilled to accept the rod and locking thumbscrew. Complete instructions are included.

If you don’t want to or don’t have the facilities to drill the headstock, it can be returned to Sherline and we will drill the holes for you for an additional charge. Call for pricing and a RMA # before sending your headstock.

Lathe headstock is shown for reference only, and is not included.

Lathe headstock is shown for reference only, and is not included.

What is included

  • 4″ hard stop rod
  • 8″ hard stop rod
  • 10-32 x 5/8″ thumb screw

Other Purchasing Options:

warning-symbol
The improper use of machine tools and their accessories can result in serious injury. Before using this tool, thoroughly read the instructions and make sure you understand its proper and safe use.

safety-glasses-symbol

Always wear safety glasses when operating machine tools.


Download PDF 40116 Instructions

Instructions PDF Download

40760 10-32 x 5/8″ thumbscrew
40102 4″ hard stop rod
40103 8″ hard stop rod