Quick-Change Tool Post w/Three Holders

Cutting tools not included. 

 

SKU: 2250 Category:
  • *Preferred unit of measurement for laser engraved portions
    Please note that our ball screws only come in a metric pitch

Product Description

About the Quick-Change Tool Post and Holders

This accessory brings to your Sherline lathe the ability to change tools quickly and easily. It uses a dovetail design to locate removable holders in a fashion similar to that used in production machine shops. The case hardened steel tool post has two machined dovetails to accept the three included tool holders. The three interchangeable tool holders are designed to hold a 3/8″ round boring bar, a 1/4″ HSS cutting tool, and a cut-off blade (cutting tools are not included). Each holder has two knurled brass knobs; the lower knob allows you to easily adjust the height of the tooltip, while the upper brass knob locks the height in place. Changing tool holders is simply a matter of releasing the locking screw on the tool post, sliding out one tool holder, sliding in another, and re-locking. If you find your jobs require a lot of tool changes, this timesaving accessory will make your projects that much more of a pleasure.

What’s included:

Optional Accessories for the Quick-Change Tool Post

Pictured below are two optional holders. P/N 2282 holds 3/8″ square shank tools. P/N 2295 comes with a 55° carbide insert. The post and holders are all machined from steel and have a black oxide finish. Knurled brass knobs adjust tool height.

2282+2295-Quick-Change-Tool-Holders

Left: P/N 2282; Right: P/N 2295

Using the Quick-Change Tool Post with the Compound Slide

You can now mount the Quick-Change Tool Post on top of the Compound Slide (P/N 1270) using a 10-32 x 2″ SHC Screw* (P/N 40730, sold separately). See the Compound Slide instructions for details on using the compound slide and quick-change tool post together.

*NOTE: You must use the Headstock Riser Block (P/N 1297) to use the Quick-Change Tool Post, or any other tool post when mounting them to the top of the compound slide. Other tool posts may need to be modified in order to get your cutter on centerline.

warning-symbol
The improper use of machine tools and their accessories can result in serious injury. Before using this tool, thoroughly read the instructions and make sure you understand its proper and safe use.

safety-glasses-symbol

Always wear safety glasses when operating machine tools.


Download PDF 2250 Instructions

Instructions PDF Download

Tool Post and Holders Body Material Steel
Body Coating Black Oxide

Quick-Change Tool Post Body (assembly)

Part No. Description Quantity
22510 Quick-Change Tool Post Body 1
22520 Left-hand Cam 1
22530 Right-Hand Cam 1
22570 4-40 x 1/4″ SHCS 2
22620 Cam Spring Pin 2
22630 .120″ x 7/16″ Spring 2
30561 10-32 T-Nut 1
35580 Hold Down Clamp 1
40250 Tall T-Nuts 1
40330 10-32 x 5/8″ SHCS 1
40340 10-32 x 1″ SHCS 1
40540 5/16″ x 3/4″ Cone Point Set Screw 2
40660 #10 3/16″ Washer 1

Quick-Change 1/4″ Tool Holder

Part No. Description Quantity
22560 10-32 x 1″ Cup Point Set Screw 1
22600 QC 1/4″ Tool Holder Body 1
22680 Knurled QC Height Adjustment Nut 2
40670 10-32 x 1/2″ SHCS 4

Quick-Change 3/8″ Boring Tool Holder

Part No. Description Quantity
22560 10-32 x 1″ Cup Point Set Screw 1
22650 QC 3/8″ Boring Tool Holder Body 1
22680 Knurled QC Height Adjustment Nut 2
40510 10-32 x 3/8″ SHCS 4

Quick-Change Cutoff Tool Holder

Part No. Description Quantity
22560 10-32 x 1″ Cup Point Set Screw 1
22680 Knurled QC Height Adjustment Nut 2
22700 QC Cut Off Tool Holder Body 1
22710 QC Cut-Off Body Clamp 1
40670 10-32 x 1/2″ SHCS 3
Shipping

We do not charge a flat rate for shipping because of the variations in weight for our products. Instead, we charge you what the shipping company charges us. Our website uses a shipping calculator based on the daily rates for USPS and UPS based on the weight and destination of the shipment. You can also have us use your UPS/FedEx account number to charge your shipping. Just enter it in the appropriate box on the checkout page.

Domestic orders are shipped Monday – Friday. Expedited orders must be placed by 9 am PST to ship the same day.

Orders shipping ground have a processing time of 7 working days for domestic orders and 14 working days for international orders. CLICK HERE for more information on our shipping and order policies.

Returns

Most merchandise can be returned within 30 days of the purchase date. A refund will be issued to the original form of payment at the original selling price. View our complete return policy and/or start your return online here.