5/8″ Gang-Tooling Tool Post

Tools not included, shown for reference only

SKU: 5935 Category:
  • *Preferred unit of measurement for laser engraved portions
    Please note that our ball screws only come in a metric pitch

Product Description

About the 5/8″ Gang-Tooling Tool Post

We designed our gang-tooling tool post specifically for our customers who want to convert their Sherline lathe into a “Chucker Lathe” or gang-tooling lathe.

Our gang-tooling tool post offers a convenient and accurate way to hold up to four tools with a known centerline-to-centerline distance of 1.500″. This tool post has (4) 5/8″ holes for customers who want to use ER-16 collet holders with a 5/8″ shank.

You can also use our WW collet adapter (P/N 2081) to hold our WW collets in the 5/8″ Gang Tool Post. Our WW collets range from .3mm to 8mm as an option to the ER-16 holder.

For video instructions on “Indicating in Your Gang-Tooling Tool Post,” click on the video tab above, or visit our Videos page.

Includes the following:

  • 5/8″ Gang-Tool Post Body
  • 10-32 x 1″ SHCS (3)
  • Extended Tool-Post T-Nut (3)
  • 10-32 x 3/4″ SHCS (8)
  • #10 Washer (3)
  • Steel Dowel Pin 1/4″ x 3/4″ (2)

Considerations Regarding This Tool Post and Its Possible End Uses

There are many considerations regarding this tool post and its possible end uses. Please check the instructions for a complete list (click on the Instructions tab above to download the document). This tool post is designed to be used with our 13″ Mill Table in place of the lathe crosslide. Other recommended optional equipment includes either a Riser Plate for 8″ Crosslide or a Riser Plate for 13″ Crosslide in order for your tools to be on center-line with the headstock spindle.

NOTE: While the gang-tooling tool post will mount on the 6″ and 8″ crosslides, its size renders it unusable on either of these crosslides.

Available Gang Tool Posts

warning-symbol
The improper use of machine tools and their accessories can result in serious injury. Before using this tool, thoroughly read the instructions and make sure you understand its proper and safe use.

safety-glasses-symbol

Always wear safety glasses when operating machine tools.


Download PDF 5930 Instructions

Instructions PDF Download

Indicating in your Sherline Gang-Tooling Tool Post

Insert Holder Tool Post
Tool Post Body Material Aluminum
Body Coating Black Anodized
Body Dimensions (H x W X D) 1.4375″ x 6.25″ x 1.1875″
Tool Holes 1.5″ between centers
Part No. Description Quantity
59305 5/8″ Gang-Tool Post Body 1
40340 10-32 x 1″ SHC Screw 3
40250 Extended Tool-Post T-Nut 3
40690 10-32 x 3/4″ SHC Screw 8
40660 #10 Washer 3
59303 Steel Dowel Pin 1/4″ x 3/4″ 2