Nickel-Teflon Coated CNC-Ready Rotary Table

Chuck shown for reference only (not included)

  • *Preferred unit of measurement for laser engraved portions
    Please note that our ball screws only come in a metric pitch

Frequently Bought Together

3.1" 4-Jaw Chuck - Electroless Nickel-Teflon Coated

Product Description

About the CNC-Ready Rotary Table with 15/32″ Through Hole

This is a modification of our 4″ CNC-Ready Rotary Table. This modification came about after requests from our laser engraving customers. They wanted a rotary table that had a larger through hole to which you could mount our chucks.

This version of the Sherline rotary table has a Nickel-Teflon plating on the tabletop because it was designed to be used in an everyday production environment. This gives the table a rust-resistant surface that is hard and has added lubrication qualities.

NOTE: The rotary table “TOP” is the only part of the rotary table assembly that has nickel-Teflon plating.

The table is 2″ high and 4″ (100mm) in diameter. The main components have been machined from solid bar stock steel, and the complete unit weighs seven pounds. The table has been engraved with a laser, giving sharp and precise lines every 5°, numbered every 15°. These lines are calibrated with the 72-tooth worm gear that is driven by the handwheel or stepper motor. The handwheel is divided into 50 parts, making each line on the handwheel 1/10°. This allows a circle to be divided into 3600 increments without interpolation. Seventy-two revolutions of the handwheel rotate the table one revolution.

For all other details and specifications of this rotary table, see the instructions tab above for P/N 3700 or P/N 3700CNC.

Features include:

  • The through hole on this rotary table is 15/32″ (.469″)
  • The chuck adapter (P/N 37097) has a 3/4-16 thread for the chuck and a 5/8-24 thread for the rotary table
  • There is a .6485″ c’bore at the entrance of the 5/8-24 thread, which is used to locate the adapter concentric to the rotary table (See Figure 1 below)

NOTE: In order to use this rotary table with our Tilting Angle Table (P/N 3750) you will need to drill out the 10-32 center hole to 1/2″ diameter. This will allow the maximum diameter of stock to feed through the rotary table (See Figure 2 below).

Click on images for a larger view.

Using the rotary table with the limit switches on the TAT

NOTE: For instructions on using the rotary table with the limit switches on the TAT, click on the Instructions tab above and download the PDF MASSO Rotary Table Limit Switch Interference on the Tilting Angle Table.


warning-symbol
The improper use of machine tools and their accessories can result in serious injury. Before using this tool, thoroughly read the instructions and make sure you understand its proper and safe use.

safety-glasses-symbol

Always wear safety glasses when operating machine tools.

Download PDF 3700-CNC Ready Instructions

Instructions PDF Download

Download PDF 3700 Instructions

Instructions PDF Download

Download PDF Troubleshooting CNC Rotary Table Problems

Instructions PDF Download

Download PDF CNC Rotary Table Maintenance Instructions

Instructions PDF Download

Download PDF MASSO Rotary Table Limit Switch Interference on the Tilting Angle Table Instructions

Instructions PDF Download

Video examples of different weights and uses for our rotary tables.

Laser Engraving with Sherline “Pin Jaws”

10930 3/8″ Bearing
12050 8-32 x 3/8″ SHC Screw
12070 9/64 Hex Key
3058 4-Jaw Hold Down Set Assembly
37097 Rotary Table 3/8-16 to 5/8-24 Chuck Adapter with Through Hole
371102 Nickel-Plated Rotary Table
37123 CNC Rt Coupling
37124 CNC Rt Coupling Adapter
37131 CNC Worm Shaft
37150 Oil Plug
37160 Preload Nut
37170 Rt Lock Pin-Hardened
37200 10-32 x 3/8″ Button SHC Screw
37220 6-32 x 1/4″ Button Hd SHC Screw
40050 Y-axis Handwheel (Crosslide) Assembly
40420 Headstock Bearing
40520 10-32 x 3/16 Cup Pt Set Screw
40530 5-40 x 3/8″ SHC Screw
40540 5/16-18 x 3/4″ Cone Point Set Screw
40660 #10 Washer 3/16
40670 10-32 x 1/2″ SHC Screw
50120 Back Lash Lock Pointer
87510 Rotary Table Stepper Motor Mount Assembly

Click the P/Ns below to download a zipped version of the IGS 3D CAD file. You will need to extract the zip file before viewing the files.
3700-CNC 3D IGS model
You need an IGS viewer to open .igs files. CLICK HERE to download a FREE IGS viewer.