Nickel-Teflon Coated CNC Rotary Table with Stepper Motor

Chuck shown for reference only (not included)

  • *Preferred unit of measurement for laser engraved portions
    Please note that our ball screws only come in a metric pitch

Frequently Bought Together

3.1" 4-Jaw Chuck - Electroless Nickel-Teflon Coated

Product Description

About the CNC Rotary Table with 15/32″ Through Hole

This is a modification of our 4″ CNC Rotary Table with Stepper Motor. This modification came about after requests from our laser engraving customers. They wanted a rotary table that had a larger through hole to which you could mount our chucks.

This version of the Sherline rotary table has a Nickel-Teflon plating on it because it was designed to be used in an every-day production environment. This gives the table a rust resistant surface that is hard and has added lubrication qualities.

The table is 2″ high and 4″ (100mm) in diameter. The main components have been machined from solid bar stock steel, and the complete unit weighs seven pounds. The table has been engraved with a laser, giving sharp and precise lines every 5°, numbered every 15°. These lines are calibrated with the 72-tooth worm gear that is driven by the handwheel or stepper motor. The handwheel is divided into 50 parts, making each line on the handwheel 1/10°. This allows a circle to be divided into 3600 increments without interpolation. Seventy-two revolutions of the handwheel rotate the table one revolution.

Features include:

  • The through hole on this rotary table is 15/32″ (.469″)
  • The chuck adapter has a 3/4-16 thread for the chuck and a 5/8-24 thread for the rotary table
  • There is a .6485″ c’bore at the entrance of the 5/8-24 thread which is used to locate the adapter concentric to the rotary table (See Figure 1 below)

NOTE: In order to use this rotary table with our Tilting Angle Table (P/N 3750) you will need to drill out the 10-32 center hole to 1/2″ diameter. This will allow the maximum diameter of stock to feed through the rotary table (See Figure 2 below).

Click on images for a larger view.

Using the rotary table with the limit switches on the TAT

NOTE: For instructions on using the rotary table with the limit switches on the TAT, click on the Instructions tab above and download the PDF MASSO Rotary Table Limit Switch Interference on the Tilting Angle Table.

warning-symbol
The improper use of machine tools and their accessories can result in serious injury. Before using this tool, thoroughly read the instructions and make sure you understand its proper and safe use.

safety-glasses-symbol

Always wear safety glasses when operating machine tools.

Download PDF 3700-CNC Ready Instructions

Instructions PDF Download

Download PDF 3700 Instructions

Instructions PDF Download

Download PDF Troubleshooting CNC Rotary Table Problems

Instructions PDF Download

Download PDF CNC Rotary Table Maintenance Instructions

Instructions PDF Download

Download PDF MASSO Rotary Table Limit Switch Interference on the Tilting Angle Table Instructions

Instructions PDF Download

Video examples of different weights and uses for our rotary tables.

Laser Engraving with Sherline “Pin Jaws”

Rotary Indexer Specifications
Table Size 4″ diameter by 2″ height
Part mounting Provisions Center thread including chuck adapter and 4 T-slots
Rotation Speed 1°/ sec to 50°/sec maximum
Resolution 28,800 steps per revolution (±.006° per step)
Backlash Compensation Programmable
Stepper Motor 120 oz-in, 2 Amp, NEMA 23 Frame size, 400 steps per revolution, 530 RPM (maximum)
3710-CNC Nickel-Teflon Coated Rotary Table with 15/32″ Through Hole-CNC Ready Assembly
67127 Stepper Motor Assembly w/Flat & Plug Assembly

Click the P/N below to download a zipped version of the IGS 3D CAD file. You will need to extract the zip file before viewing the IGS file.
8731 3D IGS model
You need an IGS viewer to view .igs files. CLICK HERE to download a FREE IGS viewer.

Shipping

We do not charge a flat rate for shipping because of the variations in weight for our products. Instead, we charge you what the shipping company charges us. Our website uses a shipping calculator based on the daily rates for USPS and UPS based on the weight and destination of the shipment. You can also have us use your UPS/FedEx account number to charge your shipping. Just enter it in the appropriate box on the checkout page.

Domestic orders are shipped Monday – Friday. Expedited orders must be placed by 9 am PST to ship the same day.

Orders shipping ground have a processing time of 7 working days for domestic orders and 14 working days for international orders. CLICK HERE for more information on our shipping and order policies.

Returns

Most merchandise can be returned within 30 days of the purchase date. A refund will be issued to the original form of payment at the original selling price. View our complete return policy and/or start your return online here.