Boring Tools

Sold Individually

 

This product is currently out of stock and unavailable.

Product Description

These high-speed steel-cutting tools are designed for use with the Sherline boring head. They have a 3/8″ (9.5mm) diameter shank. The cutting end (P/N 3061) is designed to work in a 1/4″ (6.4mm) minimum hole with a maximum depth of .600″ (15.2mm). P/N 3063 is designed to work in a 5/16″ (7.9mm) minimum hole with a maximum depth of 1.00″ (25mm). P/N 3064 is also 5/16″ minimum but has a longer 1.5″ reach. If desired, they can easily be ground down to work in a smaller hole. These tools can also be used in the round hole of the 3/8 tool post on a lathe for boring. The shank has a flat ground on one side that is for the set screw of the boring head to tighten against.

warning-symbol
The improper use of machine tools and their accessories can result in serious injury. Before using this tool, thoroughly read the instructions and make sure you understand its proper and safe use.

safety-glasses-symbol

Always wear safety glasses when operating machine tools.


Download PDF Instructions

Instructions PDF Download