Product description
This chuck includes a #0 Morse arbor for use in the tailstock for center drilling and a #1 Morse arbor for use in the headstock. It will hold drills from 3/32″ (2.4 mm) to 3/8″ (9.5 mm) in diameter. Runout is .003″ or less. If runout of less than this amount is required, collets should be used to hold the drill rather than a chuck.
Because of its longer length and ability to hold longer 3/8″ drills, it is normally recommended for use on the longer 4400-series lathes.