Oversize 2½″ Handwheels

SKU: N/A Categories: ,

This product is currently out of stock and unavailable.

Product Description

Using a larger handwheel can give a tool a more substantial feel and make cranking easier. These large 2½” handwheels have the same number of graduated markings as the standard 1⅝” or 2″ handwheels but offer a “beefier” feel. They can be used on either the lathe or mill.

NOTE: The Oversize 2½” handwheel is not recommended for use on the lathe tailstock as it will interfere with the leadscrew handwheel if oversize handwheels are used on both.

When upgrading handwheels, consider also the zero adjustable handwheels. They are available in 2″ and 2½” diameters and can make keeping track of dimensions easier.

Click on the image for a larger view.

FIGURE 1: The engraved numbers on the handwheels are oriented differently for ease of reading depending on the axis onto which they are mounted. For example, if you mount a handwheel designed for the mill X-axis on the mill Y-axis, the numbers will appear upside down (handwheels shown in FIGURE 1 are not necessarily those that will ship with your order).

warning-symbol
The improper use of machine tools and their accessories can result in serious injury. Before using this tool, thoroughly read the instructions and make sure you understand its proper and safe use.

safety-glasses-symbol

Always wear safety glasses when operating machine tools.


Download PDF 3400 Instructions

Instructions PDF Download

34020 Oversize Handwheel Knob
34030 Oversize Handwheel Shaft
34070 2.5″ Handwheel Body, X/Z Axis (Metric P/N 34090)
34010 2.5″ Handwheel Body, Y Axis (Met. P/N 34110)
34080 2.5″ Handwheel Plug
40190 Snap Ring
40520 10-32 X 3/16 Cup Pt Set Screw