5/8″ Rear Side Multi-Tool Holder

The rear side, multi-tool holder, was designed to complement our four-position, gang-tooling tool posts. It can be used in conjunction with the gang-tooling tool post or on its own for our customers who want to convert their Sherline lathe into a “Chucker Lathe” or gang-tooling lathe.

The rear-mount tool holder is slightly taller than its front-side counterpart, P/N 5937, allowing the tool to be mounted upside down and used on the backside of the crosslide. The round holes are for holding ER16 collet holders with a 5/8″ shank.

Our rear-side, multi-tool holder offers a convenient and accurate way to hold up to two ER16 collet holders with a 5/8″ shank with a known center-line-to-center-line distance of 1.500″ and a slot to hold 3/8″ square carbide tool holders on the “back” side of the part for turning, grooving, or threading tools.

We also offer a rear-side, multi-tool holder for customers who want to use 3/8″ round boring tools.

For video instructions on “Indicating in Your Gang-Tooling Tool Post,” click on the Video tab above or visit our Videos page.

Includes the following:

• 5/8″ Rear Side, Multi-Tool Post Body
• 10-32 x 1-1/8″ SHCS (2)
• Extended Tool-Post T-Nut (2)
• 10-32 x 3/4″ SHCS (6)
• #10 Washer (2)
• Steel Dowel Pin 1/4″ x 3/4″ (2)

Considerations Regarding this Tool Holder and Its Possible End Uses

There are many considerations regarding this tool post and its possible end uses. Please check the instructions for a complete list (click on the Instructions tab above to download the document).