55° Carbide Insert-10 Pack

SKU: 7605B Categories: , Tag:
  • *Preferred unit of measurement for laser engraved portions
    Please note that our ball screws only come in a metric pitch

Product Description

About the Replacement 55° Carbide Insert

Though not inexpensive, when you consider you are getting four cutting tools in one and are saving a lot of time in tool sharpening, it is a pretty good deal.

Carbide cutters give good finishes on hard-to-machine materials such as cold-rolled steel. They also work on aluminum, brass, or leaded steels and last practically forever. However, the best finishes on those materials are still achieved with a good, sharp high-speed steel tool.

The Difference between Coated and Uncoated Inserts

Insert Color Insert Coating Insert Style Insert Size Code General Purpose
Gold Tin coated DPMT 21.51-C5C6 Good for steel, stainless steel, and bronze.
Silver Uncoated DPMT 21.51-MP2 Good for brass, aluminum, and plastic. Has better chip lift.

warning-symbol
The improper use of machine tools and their accessories can result in serious injury. Before using this tool, thoroughly read the instructions and make sure you understand its proper and safe use.

safety-glasses-symbol

Always wear safety glasses when operating machine tools.


Download PDF Carbide Tip Tools Instructions

Instructions PDF Download

 

INSERT IC 1/4″
INSERT WIDTH 3/32″
CORNER RADIUS 1/64″
THROUGH HOLE .110″
RELEIF ANGLE 11°
FEED RANGE .003 to .012 IPR / 0.1-0.3 MM/rev
COATING Multi Layer CVD (TiN/TiC/TiCN/TiN)
ISO DESIGNATION DPMT 21.51